2009 Chris White Atlantic 57
Yacht price :
CERULEAN is without doubt one of the finest built catamarans in existence. Every square inch of interior and exterior was crafted with attention to detail never achieved in production built catamarans and seldom if ever matched by other custom builders. The insides of all lockers, bilges, mechanical installations are as well finished as the exterior. All mechanical systems are beautifully installed and easily accessible for maintenance.
The interior is finished with AwlGrip with varnished laminated cherry trim providing an easy to clean extremely durable surface that will look just as good in 20 years as it does now.
Hulls, decks and bulkheads are constructed of laminated epoxy and high strength S-2 Glass fiber. S-2 Glass has twice the impact strength of carbon fiber. S-2 Glass also has improved stiffness and fatigue resistance. It is a great material for boat hulls but seldom used due to its cost.
CERULEAN has been professionally maintained by full time crew from launch day to present.
Sailing performance is superb on every point of sail. Well balanced, fast and easy to single hand there isn't a faster ocean cruising catamaran available.
Northstar Yacht Sales, LLC is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Chris White Designs.
- Chris White
- Atlantic 57
- Brisol, RI, US
- Vessel Name:
- Boat Type:
- Hull Material:
- Hull Type:
- Hull Color:
- Flag of Registry:
Dimensions & Weight
- 57 ft - 17.37 meter
- 187 ft - 57 meter
- 28 ft 4 in - 8.63 meter
- Draft - max:
- 7 ft 10 in - 2.39 meter
- Bridge Clearance:
- Dry Weight:
- Cruise Speed:
- Joystick Control:
- Engine Type:
- Drive Type:
- Fuel Type:
- Max Speed:
- Total Cabins:
- Total Berths:
- Total Sleeps:
- Total Heads:
- Captains Cabin:
- Crew Cabins:
- Crew Berths:
- Crew Sleeps:
- Crew Heads:
Hulls, decks and pilothouse are constructed from vacuum bagged Epoxy resin and high performance S-2 uni-glass fabrics cored with “Core-Cell” SAN foam and PVC foam.
Crossbeams are built of uni-directional carbon fiber/epoxy with foam cored epoxy/glass bulkheads.
Extensive use is made of uni-directional carbon fiber reinforcement in high load areas of hulls and decks.
Interior joiner work and floorboards are all cored panels to provide stiffness at low weight.
Metal chainplates, stanchions, rudder posts are all fabricated of Titanium for high strength, low weight and corrosion resistance.
All exterior surfaces are spray painted with linear polyurethane "AwlGrip"coating.
Propulsion and Steering
Twin Volvo D2-55 (55 HP) diesel saildrive engines
Dual instrument panels with tachometer and engine monitoring gauges and alarms.
Primary and secondary fuel filters.
Dual “ZF Micro Commander” electronic single lever engine controls mounted at both the cockpit helm station and pilothouse inside helm.
ZF remote engine controls
Three blade Flex-o-Fold bronze geared folding propellers
Rudder blades are fiberglass composite, high performance hydrofoil section with solid Titanium rudder stocks turning in low friction bearings.
Carbon Mast and Booms
Carbon Fiber Spars (Mast, main boom, jib boom, forward crossbeam and compression beam) from Hall Spars.
Painted mast, deck stepped with two sets of rod diamonds over single spreader.
Masthead light, masthead VHF, wind instruments
All halyards and reefing lines are led to cockpit.
Boom has internal reefing lines, topping lift
Self tacking jib hardware with Profurl reefing/furling unit
Profurl reefing/furling unit for Genoa jib.
All type 316 1x19 SS Dyform wire rope stays and shrouds
Navtec rod for mast diamond stays
Dyneema halyards and control lines. Low stretch Dacron sheets.
Mainsail: New 2016 Ullman “Fiberpath” high-performance cruising laminate, 983 sq. ft., true multihull sail design, 3 reefs, 6 full batten pockets, webbing chafe protection full length, both sides of pockets, offshore construction, leech line with exits at reefs, tell tails. Harken batten car system
Genoa: 819 sq. ft., offshore construction, foam luff for reefing, Sunbrella UV strip sewn with tenara thread, leech and foot lines, tell tails;
Self Tacking Jib:, 445 sq. ft., offshore construction, foam luff, Sunbrella UV strip sewn with tenara thread, leech and foot lines, tell tails. Profurl roller furling/reefing.
Asymmetrical spinnaker: 2009, good condition with dousing sock.
Harken Radial Winches all recently serviced
One, B60.STEV- electric #60 for mainsheet/main halyard
One, B50.STEH- electric for staysail sheet and reef lines
Two, B60.2STA for reaching genoa/spi sheets
Three, B50.2STA for traveler/runner controls and staysail traveler
Harken Mini-Maxi main sheet traveler 11’6” long
Harken self tacking jib traveler, 12’ long
Harken ball bearing blocks are standard equipment.
Spinlock rope clutches
Two cored glass fiber asymmetric “hi lift” daggerboards in epoxy/glass laminate trunks with low friction bushings
Up and down haul control lead to cockpit
Each hull has a collision bulkhead forward.
(4) Solar Panels, 130 watt output each
Two Silent Wind, wind generators
24-volt circuit breaker panel
Trojan battery house bank, 2015
PHASE THREE battery charger . Universal input accepts both 50 and 60 cycle power 110/220V
Custom LED lights throughout cabin and galley
LED red night lighting within the pilothouse
AC Electrical System
Mastervolt 120v 3000w inverter
(2) Alumium 100 gallon diesel fuel tanks each with deck fill, shut off and gauge
(2) composite 80 gallon water tanks each with deck fill, vent and gauge
Spectra “Catalina”, 12 gal/hr output
Icom VHF and SSB radios
Furuno Nav Net chart plotter
KVH Sat com
B&G with hydraulic linear drive direct to rudder
RAYMARINE secondary pilot
Fusion stereo, AM/FM/iPod
Hull and Deck Ventilation:
16 Deck hatches, all Lewmar Ocean Series. Accommodation area hatches are equipped with roller shade/screens.
Two Lewmar escape hatches installed on the hull inboard side.
Lewmar Atlantic opening portlights with clear plexi windows, three in each outboard hull side
Lewmar Atlantic model opening port is located adjacent to each double berth
Cowl vents in engine rooms and in each head
Hella fans, two in each double berth, one in the galley, one each in the pilothouse helm station and nav area.
Provided by “Hurricane” diesel fired furnace sending hot water to radiators in the living areas.
Rails and Lifelines:
Custom fabricated Titanium stanchions and lifelines.
Custom fabricated Titanium pushpits
(4) Titanium Transom grab rails
Integral swim step on rudder
Custom boarding ladder
Dual bow anchor rollers enable two anchors to be easily used at the same time.
Lewmar V4, windlass with rope/chain gypsy and dual direction switch.
Self-bailing lockers for self stowing chain and rode.
Primary anchor 66lb. Spade with 150' of 3/8” H.T. chain and 250' of 3/4” anchor rode.
Second anchor is a Fortress 20' of 3/8” chain and 200' of 5/8" rode.
Cleats and Docklines
Eight 12" docking cleats
Two 12” mooring cleats
Five (5) 5/8" 3 strand nylon docking lines each 50' in length are supplied.
LED masthead Tri-color and anchor light
Mast mounted steaming light with deck flood light
LED deck level running lights
Cockpit, dimmable LED
Aft deck, dimmable LED lights
Aft deck floodlights
Varnished laminated Cherry cabinet door frames, fiddles and trim.
Beautiful teak soles in accommodation spaces with durable clear urethane finish.
Awlgrip polyurethane finish on interior hull, deck and bulkheads in accommodation areas
Attractive stain resistant fabric for pilothouse settee seats and other cushions.
Port and starboard settee seats both have a varnished wood table. Port side table is a movable “coffee table”. Starboard side table is a dining table configured so that it can be moved on the aft deck for open air dining. Settee seats have partitioned stowage beneath via lift out covers in the seat top.
Inside Helm Station
A 30” destroyer type wheel is mounted to starboard with a 4" flush mount Ritchie SS-2000 compass, engine instrument panels, electronic gear shift/throttle control and sailing instruments (depth,wind,speed) located within easy reach of the wheel.
Pilot House Nav. Station
Extra large chart table measuring 55" x 34" with full size chart drawer beneath
Ample space for nav and satcom gear.
Extra outlets for laptop computers, printer, etc..
Tank Tender, 6 tank monitor
High strength, race boat style, Dyneema knotless net.
Custom Bimini top
Carbon fiber dinghy hoist.
Dinghy tie downs built into the aft deck
Four large lockers along the forward side of aft deck for stowage.
Attractive teak folding chairs
Dual flush mount propane stove, oven and broiler.
Two 120v outlets for other cooking appliances
Custom galley sink is a deep brushed stainless steel built into a SS counter top.
Hot and cold pressurized water delivered by single lever mixer.
Ample drawers, lockers and shelves for storage. Built in trash container.
A custom fabricated side by side refrigerator/ freezer (7 and 5 cu/ft capacity) is located in the galley, inboard side. Adjustable shelves included in each compartment. Each unit uses a separate highly efficient SeaFrost compressor with electronic control thermostat providing redundancy.
Each hull has a separate aft cabin which contains a large double berth, hanging locker, built in dresser, two bench seats with additional stowage beneath seats and berth. A deck hatch and opening ports provide excellent cross ventilation.
Each hull has a sleeping cabin amidships that contains a large queen sized berth (66"x80"). A hanging locker, built in dresser, storage cabinet and bookshelf is included. A large deck hatch and two opening ports provide ventilation.
Forward in each hull is a head and shower compartment.
Lavac Toilets for reliability and ease of cleaning with manual water pump.
Toilets are plumbed to holding tank with valves for overboard discharge as well as pump out.
Each head is equipped with a vanity with polished stainless steel sink with hot/cold pressure water via a chromed single lever mixer. Bright carbon fiber laminate counter top and stowage locker beneath. Two large stowage lockers with shelves for towels, etc. are within easy reach.
Gloss polyurethane finish for easy cleanup
Hot/cold pressure water with mixer
Manual sump pump
Domestic Hot Water Heater
Hurricane diesel fired water heater to Isotemp 40 liter hot water tank.
A hot and cold water pressurized rinse station is installed on the hull transom boarding platform.
Freshwater hose bibs located in cockpit and aft deck.
Workbench (port hull)
Polished SS counter with mounted vice
Drawers and lockers below for tool and parts storage
Lockers above for stowage
The entire above water line exterior of the boat is spray painted with linear polyurethane (Alexseal) polyurethane coating. Walking areas are non-skid finished. Contrasting painted boot and sheer stripe.
Hull Rub Rail
An external rub rail with solid metal cap.
MA2-75FE Fireboy - Automatic fire suppression system
Three portable fire extinguishers.
AB 12’ hard bottom inflatable, Yamaha 15HP engine; 2014
Two helm chairs in pilothouse
Bedding, towels, table cloths etc
Extensive galley equipment,
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Presented by :
Our Locations :
Featured Listings :
Bristol, RI, US $79,900
Portsmouth, RI, US $99,900
Brooklin, ME, US $649,900
Jamestown, RI, US $50,000
Portsmouth, RI, US Upon Request
Osterville, MA, US $109,900
Portsmouth, RI, US $74,900
Portsmouth, RI, US Upon Request
Portsmouth, RI, US $90,000
Narragansett, RI, US $44,900
Portsmouth, RI, US $164,900
Portsmouth, RI, US $19,500