2002 Beneteau First 36.7

Designed, Farr Yacht Design, the First 36.7 was inspired by the worldwide success of her big sister, the First 40.7 - the most successful and prolific performance yacht of her size in the last 20 years. Sleek on the edges and responsive at the helm, the 36.7 incorporates a variety of innovative features at an incredible value.

"Crocodile" has been very well maintained and upgraded by her current and only owners. She is ready to take you around the buoys or off on your family cruise.

Starting in the forward cabin you have a large v-berth (6' 5"X5' 2"). This cabin also has storage under the berth, shelves alongside the hull and a hanging locker.

The head is just aft of the forward cabin. This is a fully molded compartment for easy cleanning. A round wash basin with mixer tap, pressurized hot and cold shower, mirror, towel hook and accessories complete this space.

The salon follows next. This area features a removable center-line table with folding leaves on a stainless steel pedestal base. On either side of the table you have a straight settee with lockers above the seat backs, storage in the seat backs, and grab rails overhead. Pressure laminate floorboards provide a very durable surface throughout the yacht.

The galley is aft to port and the Nav station is aft to starboard of the salon. The nav station has a large table with space for storage, ample space for instrumentation and additional storage under the seat.

Two aft cabins complete her interior. The port cabin features a "queen" double berth (6' 6"x5' 8") and the starboard cabin has a an over-sized single berth (6' 6"x3' 8"). Other features in the cabins include: hanging lockers, shelves alongside the hull and storage space under the berths.

Natural light and ventilation, to the interior, is provided by the many opening hatches and ports. 

L-shaped galley is located to port.

• Double S/S sink with mixing tap
• Pressurized hot and cold water
• Gimbaled 2-burner LPG stove with oven
• 12 Volt electric refrigeration
• Cutlery drawer
• Trash can

• Raymarine ST60 windspeed and direction
• Raymarine ST60 depthsounder
• Raymarine ST60 knotmeter
• Sailcomp: compass and navigation that links to Chartplotter
• SiTex 11-inch Color Chartplotter
• AM/FM radio/CD with cockpit speakers
• Std Horizon VHF radio with cockpit handheld remote

• 12 Volt circuit
• (2) 80 Amp batteries (replaced 2010)
• 14-functions electrical panel
• Navigation lights
• 30 AMP Shore Power 110 volt inlet
• Shore Power cord
• 20 amp 110 volt battery charger

SAILS

• Racing Main 2009 – North 3DL “CSD” Class Aramid Mainsail
• Cruising main 2002 – North 3DL Aramid with taffeta & slides

Headsails – all headsails fit on roller furler

• Racing #1 genoa 2002 – North 3DL Carbon/Aramid
• Racing #1 genoa 2004 – North 3DL Carbon/Aramid
• Racing #1 genoa 2008 – North 3DL Aramid
• Racing #2 genoa 130% 2008 – North 3DL Aramid with Taffeta Core - hardly used
• #3 jib 2002 – Marathon 3DL (fits roller furler) – great cruising sail!

Spinnakers – All spinnakers fit penalty pole

• Masthead Code 2S spinnaker 2010 – Norlite 60
• Code 1S spinnaker 2003– Norlite 50
• Code 2S spinnaker 2002 - AIRX 600
• Code 3S spinnaker 2002 – Norlon 75 – hardly used.

RIGGING

• 9/10 fractional rig
• Double spreaders
• Anodized aluminum boom
• Mast step fitting with Lewmar® blocks
• Navtec® rod
• Backstay adjuster
• Aramid backstay
• Sparcraft® rigid boom vang
• Harken furler with split drum
• Spinnaker gear – dip pole setup with dual sheets and guys
• Forespar Carbon fiber spinnaker pole 13.1 (Class)
• Hall Carbon fiber spinnaker pole 13.4 (Penalty)

RUNNING RIGGING

• New main (vectran) halyard by Rig Pro
• genoa (vectran) halyards by Rig Pro
• spinnaker (dyneema) halyards by Rig Pro
• New jib sheets (technora)

Hull constructed of hand-laid solid GRP bonded to a structural grid/hull liner of directional fiberglass/GRP for a strong, stiff, light composite. Vinylester hull barrier coat to resist osmotic blistering and zonespecific stitchmat laminates for specific increased strength optimization.

Deck constructed of Cored GRP sandwich construction for stiffness, thermal and acoustic insulation and lighter weight. Solid fiberglass reinforcements in high load areas. Integral unidirectional GRP deck beams for added strength. Main bulkheads bonded 360° to the hull and deck for rigid torsional and compression strength.

"Crocodile" has "Beneteau white" gel-coat topsides with a painted green boot stripe and vinyl cove stripe. She has a  race bottom with Baltoplate bottom paint.

Deck Gear

• Stainless steel stemhead fitting with removeable bow roller 
• Self-bailing anchor locker with cleat
• Stainless steel bow pulpit with navigation lights
• Solid wood toe rail along the hull-deck junction
• (6) Aluminum mooring cleats
• SS stanchions, bases and double lifelines
• (1) Lewmar® racing mainsheet traveller track with ball-bearing car, adjustable under tension
• (2) Lewmar® racing genoa sheet tracks adjustable under tension
• Mainsheet tackle with ball-bearing blocks, and fine tune adjustment.
• (2) Lewmar® 40 AST maneuvering winches
• (2) Lewmar® 48 AST genoa sheet winches
• Spinlock® XT deckstoppers
• Wichard® foldaway padeyes for spinnaker blocks
• (2) Semi-recessed shroud chainplates
• Edson® “CDI” wheel steering with compass
• 51" Diameter Edson steering wheel
• Self-aligning upper and lower rudder bearings
• (2) Lazzarette cockpit lockers
• Solid wood helmsman seat
• Solid wood-slatted cockpit seats
• (2) Removable cockpit seat lockers
• ft lockers: port for gas bottle, starboard for storage
  Liferaft compartment below helm seat
• Emergency tiller
• Stainless steel aft pulpit with aft pulpit opening lifelines and horseshoe buoy holder
• Stern light on pulpit
• Stainless steel swim ladder
• Cold cockpit shower

• Traveler width sheet bag
• Cockpit sheet bags (2)
• Cockpit winch handle holders
• Cockpit floor stainless steel hiking footrests
• Dodger with zip on “fly”
• Memory foam V-berth topper
• Suede covered wheel